Using Your Projector 53
PIP SETTINGS—Select and press to activate pip settings. The pip settings
menu provides the following options:
PICTURE IN PICTURE—Select On to enable the picture in picture display.
Select Off to disable the feature.
SECOND SOURCE—Allows you to select the possible second source is available
in the OSD selection depending on the current primary input source. See
"PIP Combination Sources" on page 113.
SWAP—Press to swapping the first and second source displays.
SIZE—Allows you to adjust the image size of the second source. The
options are: Small, Mid, Large, and Half.
LAYOUT—Allows you to change the second source position to the four
different corners. The options are: Top Left, Top Rig ht , Bottom Left, and
Bottom Right.
INFORMATION—The information menu displays the current projector settings.