RCA manual To connect the ANT1450 with the amplifier to a converter box

English

Built-In	2	ANT1450
Coaxial Cable
Amplifier	ANTENNA
Insert	TV/STB
Converter Box	3	5
6
4a Audio/Video –or–		Coaxial 4b
Cables		Cable

TV

To connect the ANT1450 with the amplifier to a converter box:

1.Make sure your converter box is turned off.

2.Connect the ANT1450’s built-in cable to the input jack of the amplifier.

3.Connect the amplifier’s cable to the antenna input on the converter box.

4.Connect the converter box to your TV using either audio/video cables or a coaxial cable:

a.Audio/Video cable connection: Connect the video (yellow) and stereo audio (red and white) cables to the video and audio outputs on your converter box. Connect the other ends to the video and audio inputs on your TV. Make sure you match the colors of the jacks on each—yellow plug to yellow jack, red plug to red jack, and white plug to white jack.

b.Coaxial cable connection: Connect a coaxial cable to the antenna output on your converter box. Connect the other end of the coaxial cable to the antenna input on your TV.

5.Plug the amplifier’s power cord into an electrical outlet.

Important: This power unit is intended to be correctly oriented in a vertical or floor mount position.

6.Re-scan for channels on your converter box.

4