RCA ANT1450 the antenna input on your TV, electrical outlet, Re-scan for channels on your TV

Connecting the ANT1450

You can use the ANT1450 with or without its amplifier, depending on which connection gives you the best signal. Try using the amplifier first. If you notice that you’ve lost channels that you normally receive, try connecting without the amplifier.

Note: If you find that some channels require the amplifier while others do not, try unplugging the power supply for the amplifier for those channels not requiring amplification.

You can connect the ANT1450 directly to your TV or use it with a converter box.

Built-In	2	ANT1450
Coaxial Cable

Amplifier ANTENNA

Insert

TV/STB

To connect the ANT1450 with the amplifier directly to your TV:1.Make sure your TV is turned off.

2.Connect the ANT1450’s built-in cable to the input jack of the amplifier.

	3	4	3.	Connect the amplifier’s built-in cable to
				the antenna input on your TV.
			4.	Plug the amplifier’s power cord into an
	TV			electrical outlet.
	5			Important: This power unit is intended to be
				correctly oriented in a vertical or floor mount
				position.
			5.	Re-scan for channels on your TV.
			To connect the ANT1450 without the
Built-In	ANT1450		amplifier directly to your TV:
	2		1.	Make sure your TV is turned off.
Coaxial Cable
			2.	Connect the ANT1450’s built-in coaxial
				cable to the antenna input on your TV.
	TV		3.	Re-scan for channels on your TV.
	3

English

3