RCA owner manual Important Antenna Notes, ANT806 Hardware

Before You Begin

Important Antenna Notes

The ANT806 antenna system is designed to work properly when the power injector is connected to the antenna through a 75-ohm coaxial cable, such as RG6 or RG59.

The coaxial cable between the power injector and the antenna is used for:

•Carrying DC power from the power injector to the amplifier board in the antenna.

•Carrying the amplified TV signal from the antenna through the power injector to the video equipment.

If any devices are used in your home cabling system, such as amplifiers, splitters, combiners, matching transformers or 300-ohm cable, they must be connected only between the power injector and your video equipment. Any devices connected between the power injector and the antenna might cause a short in the amplifier power source. If this happens, the signals to your video equipment (multiple TVs or VCRs) may be significantly degraded.

ANT806 Hardware

The ANT806 antenna package includes the following items: 1 ANT806 antenna

1 Bracket

1 AC Adapter/DC Power injector

2 U-bolts

2V-brackets

2L-brackets

115’ roll of RG59 cable

4Wing nuts

61/8” screws and washers

22” Wood screws

1Weather boot



ANT806	_IB_01.indd 4
		5/2/07 3:29:26 PM