Playback

54 Chapter 4

Dubbing to Another Digital Video Camcorder
You can also copy a recording to another camcorder with a DV jack using an optional DV
cable.
To Use this Camcorder as a Player:
1. Make sure all units are turned off before making any connections.
2. Connect one end of the optional DV cable to each digital camcorder.
3. Press the camcorder’s Play/Pause button
/
to start playback.
4. While watching the playback on the monitor, start the receiving camcorder’s record
mode from the spot on the source tape you want to begin recording.
Notes:
•It is recommended to use the power supply instead of the battery for uniform
playback.
•For digital dubbing, this camcorder can be connected to only one device at a
time. This camcorder can also be used as the recording camcorder.
•If a blank portion or distorted image is played back during dubbing, the
process may stop to avoid capturing problem images.
•Even though the DV cable is connected correctly, sometimes the image may not
appear during playback. If this occurs, turn off the power and make
connections again.
EXPOSUREBACK
LIGHT
NIGHT
ALIVE
P
.AE
MENU/
BRIGHT
SNAP
SHOTVOL.
CHARGE
LIGHT
OFF
AUTO
ON
DV IN/OUT
DV IN/OUT