5.Point the remote directly at the
front panel of the device you want to control. Press PLAY on the remote and wait 5 seconds. The remote is testing a batch of 10 codes on your device.
Did your device turn off?
YES: Go to step 6.
NO: Press PLAY again.The remote tests the next batch of 10 codes.
Keep pressing PLAY every 5 seconds until your device turns off.
6.When your device turns off, press
the REVERSE key on the remote and wait at least 2 seconds. The remote tries the last of the previous ten codes.
Did your device turn on?
YES: Press the STOP key.You’re done!You’ve programmed this
device key.
NO: Press REVERSE again.The remote tests the next code in the batch.
Keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP.
Note: If you accidentally press the REVERSE key after your device turns on, press the FORWARD key.Then, wait two seconds to see if your device turns off again.
NOTES
Throughout the programming of each key, be sure to keep the remote pointed at the IR sensor of the device you are currently programming the remote to control.
Test the remote with the device to make sure the device key is programmed with the correct code for maximum functionality. If some features don’t work, try a different code. See the “Testing the Code for Maximum Functionality” section below for more information.
During the Auto Code Search, the remote ignores keypresses that aren’t part of the search.
The search times out after two minutes (the indicator light blinks four times and turns off, and the last programmed code under that device key is retained).
The indicator light blinks four times and turns off when the remote has gone through all the codes.The remote exits the Auto Code Search. If your device hasn’t turned off yet, try a different search method.
Brand Code Search
The Brand Code Search goes through only the codes for one of the select brands listed in the accompanying code list. If your brand of device is listed, this search can be very quick and easy.
TIP:To exit without saving a new code at any point in the Brand Code Search, press the GO BACK key.
1.Manually turn on the device you
want to control.
2.If you’re programming theTV or SAT•CBL•DTC key, go to step 3.
If you’re programming the VCR•DVD key, you need to tell the remote which kind of device you want this key to control, VCR or DVD.
Press and hold the VCR•DVD key. While you’re holding down the VCR•DVD key, use your other hand to press the number key for the type of device you want to control with this key: 2 for VCR, 3 for DVD.Then release both keys.
TV
TV | VCR•DVD SAT•CBL•DTC |
VCR•DVD SAT•CBL•DTC
3. Find your device’s brand in the Brand | deCódigos |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Code | Lists |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Code list section of the accompanying |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lista |
|
| TV |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
code list. Circle the number for your | 0 | 1 2 | 3 |
| VCR |
| 7 | 8 |
| 9 |
| 9 |
|
|
|
| ||
| 6 |
|
|
|
|
|
|
|
| |||||||||
brand and keep the list handy. |
|
|
| 4 | 5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0 | 1 | 2 |
|
|
| DVD | 6 | 7 | 8 |
|
| 9 |
|
| |||
|
|
|
|
|
| 4 | 5 |
|
|
|
|
|
|
|
|
| ||
|
|
|
|
| 3 |
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| 6 | 7 | 8 |
|
|
| |
|
|
|
|
|
|
|
|
| 4 |
| 5 |
|
|
|
|
| ||
|
|
|
|
|
| 2 |
| 3 |
|
|
|
|
|
|
|
|
| |
|
|
|
|
| 1 |
|
|
|
|
| LE |
|
|
|
|
| ||
|
|
|
| 0 |
|
|
|
| SAT/CAB |
|
|
| 7 | 8 | 9 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5 | 6 |
|
| |
|
|
|
|
|
|
|
|
|
| 3 | 4 |
|
|
|
|
| ||
|
|
|
|
|
|
| 1 | 2 |
|
|
|
|
|
|
| |||
|
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| |||
4. Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s ON•OFF key at the same time.
VCR•DVD SAT•CBL•DTC | TV | TV | |
VCR•DVD | |||
| SAT•CBL•DTC |
Testing the Code for Maximum Functionality
1.Try a variety of the device’s functions with the remote. If some device features don’t work, go to the next step to try a different code.
2.Repeat the Auto Code Search Method from the beginning. When your device turns off, do not stop searching. Instead, with the unit now off, continue to press the PLAY key every 5 seconds until the unit turns back on.
3.Once the unit turns back on, press the REVERSE key on the remote every 2 seconds until your device turns off again. When your device turns off again, press the STOP key.
4.Test the key’s functionality again by attempting to control a variety of the device’s functions. If the code that has been stored controls the majority of the device’s functions, programming is complete. If the code stored does not give maximum functionality, try another code.
5.Wait until the remote’s indicator comes on and stays on.Then release both keys.
6.Look at the number you circled for your device’s brand code number. Press that number on the remote keypad.
TV
TV
VCR•DVD SAT•CBL•DTC
