![](/images/new-backgrounds/1125501/12550117x1.webp)
Connections and Setup
Connection: DVD + TV + VCR
1.Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV (sometimes labeled AUDIO INPUT L and R).
2.Connect the video cable.
Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV (sometimes labeled
VIDEO INPUT).
Note: If your TV has an
– OR –
If your TV has component video jacks (Y, Pb, Pr), use
If you have a Progressive Scan TV, you must use the Component Video connection (Y, Pb, Pr), and activate Progressive Scan by pressing the PREV/VIDEO button on the front of the DVD player (for instructions, go to page 35).
3.Connect the antenna or cable to the Antenna Input jack on the VCR (sometimes labeled IN FROM ANTENNA).
Note: Connecting a VCR is optional. It is shown in this connection diagram since most households have a VCR connected to the TV.
4.Connect a coaxial cable to the Antenna Output jack on the VCR (OUT TO TV) and to the Antenna Input jack (IN FROM CABLE/ANTENNA) on the TV.
5.Insert the AC power cord into an AC outlet.
Go to page 8
More Information about Progressive Scan
Some
Note: If your TV doesn’t have Audio and Video Input Jacks and only has an RF jack, you need to connect an RF modulator (not provided). For information, go to page 41.
7
Graphics throughout this User’s Guide are for representation only.