RCA E13319 Troubleshooting, TV will not turn on or controls don’t work, Problems with remote

Models: E13319

1 16
Download 16 pages 24.26 Kb
Page 12
Image 12
TROUBLESHOOTING

TROUBLESHOOTING

If you experience any difficulty with your TV, check these basic remedies before calling your service technician.

TV will not turn on or controls don’t work

Check to make sure it is plugged in.

Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.

Try unplugging set for one minute, plugging it back in, and then turning it on again.

Make sure the Front Panel Lock feature is not set.

Problems with remote

Maybe something is between the remote and the remote sensor.

Maybe the remote is not aimed directly at the TV's remote sensor.

Maybe batteries in remote are weak, dead or installed incorrectly. Try replacing batteries.

Turns on or off while playing

Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the voltage in your house may be abnormally high.

Maybe the Sleep Timer or Alarm Timer is activated.

Blank screen or black box appears on the screen

Try another channel.

Press RESET, in case the picture controls are set too low.

Captioning may be turned on. Check the Closed-Caption Display control panel in the Screen menu.

No sound, picture okay

Maybe sound is muted. Try pressing volume up button to restore sound.

No picture, no sound, but power is on

Maybe cable/air function is in wrong position. Try another channel.

Maybe a vacant channel is tuned. Try another channel.

Sound okay, picture poor

Check antenna connections.

Try adjusting sharpness function to improve weak signals.

10

Page 12
Image 12
RCA E13319 manual Troubleshooting, TV will not turn on or controls don’t work, Problems with remote, No sound, picture okay