SETUP AND CONNECTIONS

ADVANCED CONNECTIONS

Advanced connections give you better sound and video by separating the audio and video signals and enable you to connect multiple components.

This section describes the types of inputs available on the back of your TV and suggests ways you can use them for optimum performance.

Once you have made your connections you will want to program the TV to tune to the correct Video INPUT channel in order to see and hear audio and video from the component. You will program this later in the Interactive Setup.

Back of the TV

The diagram below describes each of the back panel jacks. When connecting A/V cables, be sure to connect corresponding OUTPUTS and INPUTS (Video to Video, Right Audio to Right Audio, etc.).

Input 2 (VIDEO or Y PB PR)

Connect any of the following components to INPUT 2:

• VCR

• Internet Access Device

• Laserdisc Player

• DVD Player

Satellite Receiver

 

Input 1

The Y, PB, PR jacks are used in place of the VIDEO jack to connect

Connect any of the following components:

an optional component video source, such as a DVD player. Unlike

a single video input, the Y, PB, PR jacks maintain the video signal as

• VCR

• Internet Access Device

three separate signals through these three jacks. To ensure

• Laserdisc Player

• DVD Player

maximum picture quality, use three video-grade cables for the

• Satellite Receiver

 

Y, PB, and PR connections.

To view the component connected to Input 1:

To View the component connected to Input 2:

Use the WHO•INPUT button on the remote.

Use the WHO•INPUT button on the remote.

S-Video

 

 

 

 

 

This optional

R

L

G-LINK

G-LINK

connection can be

 

 

 

 

Connect the G-LINK

used for better

 

PR

PB

Y

 

cable for one-button

 

 

 

 

video quality

 

 

 

 

 

 

 

 

recording and

picture.

 

 

 

 

 

 

 

 

channel tuning from

 

 

 

 

 

 

 

 

 

 

the Guide.

Audio Outputs

Connect to an audio receiver or amplifier for variable controlled or fixed level stereo output.

Cable/Antenna

Takes the signal input from a cable, cable box, or an off-air antenna. Can also be used for basic component connections.

6

Page 8
Image 8
RCA F32691 manual Advanced Connections, Back of the TV