RCA L26WD21 warranty What To Expect, Watching TV, Changing Channels, List and Labels

Connections and Setup

TV	Channel
	Go Back
	Channel List	...
	Auto Channel Search	...
	List and Labels	...

<OK>: Enter Sub-menu

TV	List and Labels
	Go Back
	Channel Number	17.1arch	...
	In Channel List
	Channel Label
	Favorite Channel

<OK>: Start CH Select <R/L>: Select CH Num

<INPUT>: Select Signal Source <OK>: End Select

You might find there are still some channels in your list that are unavailable to view. To get rid of these channels, press MENU and choose Channel. Highlight and select List and Labels, select In Channel List and press OK to remove the check mark in the box. The channel will no longer be visible in the channel list. Note that removing channels from your channel list may be time consuming, so you might want to do it later. More details pls. go to page 25.

A10 CBS

Look for the A at the top of the screen to see if you’re watching analog channel.

D10-1 CBS

Sub channel

Primary channel

Look for the D at the top of the screen to see if you’re watching digital channel.

What To Expect

Watching TV

•Remember: Look for an A at the top of the screen to see if you're watching an analog channel.

Analog video is sent in a 4/3 format, your TV can display these channels in a 16/9 format by pressing the ZOOM+/- buttons to view the different formats available: Normal, Stretch, Center or Zoom.

•Remember: Look for a D at the top of the screen to see if you're watching a digital channel.

Most digital video is sent in a 16/9 format which does fill your screen, but sometimes is sent in 4/3 which does not fill your screen. It depends on how the station or source device is formatting the video. If there are bars on-screen, press the

ZOOM+/- button to try a different format that may eliminate the bars. Some bars can't be removed because of the way

the format is sent by the broadcaster.

Changing Channels

•Digital channels can have both primary channels (like the analog channel number) and sub-channels. To tune to a digital channel with a sub-channel, such as 10-1 as shown in the graphic to the left, enter the primary channel number (10), then press either the right arrow or the SUB CH button. Enter the sub-channel number

(1) and press OK.

•Depending upon the type of signals you have connected to your HDTV, you might notice that the channels change slower than you’re used to. This is perfectly normal. Digital cable channels sometimes take longer to tune.

Chapter 1 15