Connections to other equipment

 

 

 

 

(continued)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To connect a HDMI or a DVI device to the unit

The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.

Rear of the unit

To HDMI 1/DVI IN HDMI - to - DVI adapter cable

(HDMI type A connector)

 

 

(not supplied)

 

To PC/DVI AUDIO IN

 

To DVI output

 

 

Audio cord (not supplied)

 

 

 

or

HDMI cable (type A connector)

To HDMI 2 (or HDMI 1/DVI) IN

(not supplied)

To HDMI out

 

DVI device

HDMI device

NOTE:

When you connect a DVI device, you must connect only with HDMI 1/DVI.

When using HDMI 1 to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see ”Selecting the HDMI audio input source” on page 24). Otherwise you will only see the image with no sound.

If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

Coaxial Digital

Audio Output

Coaxial digital cable (not supplied)

To Coaxial Digital Audio Input

AV Amplifier with built-in digital surround decoder as listed above

Front

Speaker

Subwoofer (Right)

TV/DVD

Front

Speaker

(Left)

 

Center Speaker

Surround

Surround

Speaker (Left)

Speaker

 

(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

• Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog broadcasting.

37

51F0101A_eng.indd 37

3/10/08 10:56:11 AM

Page 37
Image 37
RCA L26HD32D To connect a Hdmi or a DVI device to the unit, Using an AV Amplifier with built-in digital surround, Tv/Dvd