|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Connections to other equipment |
|
|
| (continued) |
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To connect an audio system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control.
To control the audio, turn on the unit and the stereo amplifier, and turn off the unit’s
Rear of the unit
Amplifier
To Audio (L) Input 
To Audio (R) Input
Audio cord (not supplied)
NOTE:
•To hear sound when using an external audio amplifier, the volume of both the unit and the amplifier must be set above 0 (zero).
For example, if the volume of the unit is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.
To connect the TV/DVD to a camcorder, or a TV Game
To playback from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent
Rear of the unit
To LINE 1 or LINE 2 VIDEO/AUDIO IN
To Audio/Video OUT
Audio/Video cord
(not supplied)
or
To connect the TV/DVD to a PC (Personal Computer)
Before you connect this TV/DVD to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV/DVD.
Press INPUT SELECT on the remote control to select PC mode.
Switch on the computer. The TV/DVD can operate as the computer monitor.
Rear of the unit
To PC IN
PC/DVI |
| |
AUDIO IN | VGA cable (not supplied) | |
jack | ||
| ||
| Audio cord (not supplied) |
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
VGA 720x400 70Hz
SVGA 800x600 60Hz
XGA 1024x768 60Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To return to normal mode Press INPUT SELECT again.
NOTE:
•The
•If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the
38
51F0101A_eng.indd 38
3/10/08 10:56:12 AM
