RCA MAF15BKR installation manual Attaching the Arms to the TV, Final Installation, Specifications

Attaching the Arms to the TV

IMPORTANT! Use extra care during this part of the installation. If possible, avoid placing your display facedown as it may damage the viewing surface.

NOTE: This mount comes with a selection of different screw diameters and lengths to accommodate a wide variety of display models. Not

2. Determine the correct diameter of screw to use by

carefully trying one of each size (M4 and M6) from

the hardware kit. Do not force any of the screws

– if you feel resistance stop immediately and try a

smaller diameter screw.

3. Attach the mount arms to the back of your display

using the M6 washers (I) and the screws identifi ed

in Steps 1 and 2 (see Fig.3)

If you are using the longer screws on a display with

a curved or recessed back, you will also need to use

English

all of the hardware in the kit will be used.

Fig.2

the spacers (E). You should only use a spacer if

necessary.

Make sure the screws are snug, but do not

1.Determine the correct length of screw to use by examining the back of your display:

A.If the back of your display is fl at and the mounting holes are fl ush with the surface, you will use the shorter screws (A or C) from the hardware kit.

B.If the back of your display is curved, has a protrusion, or if the mounting holes are recessed, you will need to use the longer screws (B or D) and spacers (E).

overtighten.

For displays with	For displays with curved or
flat backs.	recessed backs.

Fig.3

Final Installation

1.With the help of another person, carefully lift your display and place it on the wall plate. Do not release the display until the mount arms have securely hooked onto the wall plate.

Fig.4

2. Insert the safety bar
at the bottom of the
mount to prevent the
display from being
lifted from the wall
plate. A padlock can
be inserted into the
end of the bar to help	Fig.5
prevent theft of your
display (see Fig.5).

IMPORTANT! The safety bar must be used at all times to prevent the display from being accidentally knocked from the mount.

Periodically clean your mount with a dry cloth. Inspect all screws and hardware at regular intervals to ensure that no connections have become loose over time. Re-tighten as necessary.

Specifications

Display Size:	15” to 32”	Universal VESA Mounting Pattern: 230 mm x 250 mm
Maximum Load:	25 kg (55 lbs)		(9” x 9.8“) max
		Profi le:	2.2 cm (0.9”)

3