Using the System
Watching Tapes
To watch a tape, turn on the player’s power, raise the LCD monitor to a desired viewing level, insert the tape into the rear panel loading slot, and press the PLAY button.
Note: To eject a tape in playback mode, press the EJECT or
STOP button twice; to eject a tape in stop mode, press the
EJECT or STOP button once.
Adjusting the Video Player
Adjust the sound to a desired level using the VOLUME up and down button.
If the LCD’s image needs to be adjusted:
1.Use the PICTURE button to display an
2.Use the VOLUME button to move the
3.Press the PICTURE button to select it.
4.Use the VOLUME button to adjust individual settings up and down. Each button is illustrated in the Controls, Indicators, and Connectors diagrams on the opposite page.
Playing Video Games
There are three jacks on the player’s jack panel. The jacks are labeled Video, Audio L, and Audio R. Plug the video output from your video game machine into the yellow Video input jack on the player. Plug the Audio cable(s) from the game machine into the corresponding Audio input jacks on the player.
Note: Prior to connecting any video game console, make sure any tape in the player is stopped.
Chapter 2 | 11 |
