RCA Mobile Video Cassette Player Using AUX Jacks, Using an External Monitor, A/V Jacks, Chapter

Using the System

Using AUX Jacks

You can view an image from an external source (like a camcorder) using the player’s A/V input jacks.

A/V Jacks

There are three A/V input jacks and three A/V output jacks on the player’s rear jack panel.

You can connect an external device like a game console or camcorder into the A/V input jacks.

Note: Make sure to stop all tape playback in the player before connecting an auxiliary device to the player’s A/V input jacks.

You can connect the player to another device like a VCR using the A/V output jacks.

8PIN DIN JACK

1 2 3

4 5 6

7 8

PIN ASSIGNMENT

1.POWER (DC 12V) OUTPUT

2.N.C or IR REPEAT OUTPUT

3.POWER (GND) OUTPUT

4.VIDEO OUTPUT

5.VIDEO GND

6.AUDIO R OUTPUT

7.AUDIO GND

8.AUDIO L OUTPUT

Using an External

Monitor

Your player has a monitor port in the rear which provides DC 12V and A/V output in one DIN socket. Connect the the unit via the monitor port to an external monitor or TV (monitor cable not included).

CAUTION: For vehicle use, connect the mobile video player only to a factory equipped compatible display. To determine full compatibility, check the owners user guide provided by your vehicle manufacturer.

Damage can occur using a non-compatible monitor if it does not have a fully compatible 8-pin input jack. For the specific wiring function of each electrical pin within the jack, see the illustration at left.

12 Chapter 2