Toshiba e-STUDIO16 Image Shift Copying, Specify the margin by using Key, Default margin is 7 mm

3. IMAGE SHIFT COPYING

You can create margins on the copy and specify the position of these margins on either the right or the left side of the copy. You can also create margins on copies of book originals using DUAL PAGE mode. Page 4-12.

The default margins is approximately 7 mm, but you can select any margin between 4 and 15 mm.

Example of Image Shift Copying

Margin on left side Copy Margin on the right side Copy

4

1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears.

2

3

Press the key to display “IMAGE SHIFT.” Then

press the key.

Select on which side the margin is to be created.

Then press the key.

•Select either “LEFT MARGIN” or “RIGHT MARGIN” to be set.

READY	1
DUPLEX	:1>1
DUAL PAGE	:OFF
IMAGE SHIFT	:OFF

IMAGE SHIFT	1
OFF
LEFT MARGIN
RIGHT MARGIN

Specify the margin by using the		or	key.	LEFT MARGIN	1
4 Press the	key.				15mm
				7mm
• The default margin is 7 mm.
					4mm
• Any value ranging from 4 mm to 15 mm is acceptable.

5 Upon pressing the key, the programmed margin

appears on the screen. Press the key to return to the initial screen for copying.

6 Place the originals on the feed tray or on the glass.

7 Select the desired paper cassette, image density, reproduction ratio and copy quantity.

8 Press the key.

READY		1
DUPLEX	:1>1
DUAL PAGE	:OFF
IMAGE SHIFT :L-		7mm

4-13