1
2
3
4
5
6
7
9
10
11
12
8
6-6 FINISHING MODE SELECTION
4. OFFSET COPYING
When the Offset Tray or Finisher is attached, the sets of copies that are collated or stacked in groups are
output in one pile but each set is offset, as illustrated.
Example:Making 6 sets of copies from 3-page originals. (Bypass copying is not possible in the offset
mode.)
1Place the originals in the feeder or on the glass.
Select the desired number of copies, image density
and reproduction ratio.
3Select the OFFSET mode.
Select NONSORT/OFFSET or SORT/OFFSET from the
FINISHING menu by pressing the key. Then press
the key.
3
2
1
111
2Press the key. The FINISHING screen appears.
When the offset tray is full, the following message appears:
Remove paper from offset.
Remove the copies from the tray and press the key to
continue.
Refer to the procedures described in NON-SORT
COPYING when NONSORT/OFFSET is selected.
Page 6-3
Refer to the procedures described in SORT COPYING
when SORT/OFFSET is selected. Page 6-4
READY 1
FINISHING:
NONSORT/OFFSET
SORT
SORT/OFFSET