Toshiba e-STUDIO20, e-STUDIO25 manual Loading Paper, Close the cover of the large-capacity feeder

2. LOADING PAPER (Cont.)

Adding Paper to the Large-Capacity Feeder (option for e-STUDIO20/25)

1 Pulling up the grip, draw out the large-capacity feeder carefully until it comes to a stop.

2

73

Open some paper packages, take out entire reams of paper and set them aligned in tray and tray .

•When setting the paper, set the paper for to the right aside, and set it for to the left aside. (The paper can be set neatly if you pile up the paper little by little alternately in the tray and .) Be sure that the centre lever is not open (Refer to the labels attached in the large-capacity feeder).

•Do not add paper above the line indicated on the guide.

•Up to 2500 sheets of paper (recommended by Toshiba) can be set.

•Paper starts being fed from the elevator tray at first, and

when it runs out of paper, the paper on tray moves to the position .

•Do not use creased, folded, wrinkled or damp sheets of pa- per.

Close the cover of the large-capacity feeder.

•Close the cover completely. The elevator tray automatically moves up to the paper feeding position.

A

B

7-4 WHEN THE GRAPHIC SYMBOL FLASHES