Toshiba e-STUDIO20, e-STUDIO25 Automatic Sleep, Select 01. Machine Defaults and press the key

Automatic Sleep

If the copier remains idle (Default: 15 minutes with the e-STUDIO16 and 45 minutes with the e-STUDIO20/25) after entering Automatic Low Power mode as explained on the previous page, the copier shifts to the Super

Energy Saver mode. The LED turns on and the message display goes blank.This mode saves more power than the Auto Lower Power mode. If there are documents in the automatic document feeder, the original cover is open or the FAX option is installed; the machine enters the Sleep mode and “Sleep mode” appears on the message display.

How to Change the Sleep Time

1 Press the key to enter the program menu.

2 Select “01. DEFAULT SETTINGS” and press the key.

PROGRAM

01.DEFAULT SETTINGS

02.LISTS 03.INITIAL SETUP

5

3 Select “01. MACHINE DEFAULTS” and press the key.

Tip

"03. FAX SETUP" can be selected only when the FAX option is installed.

4 Select “03. TIMERS” and press the key.

Tip

"02. WALKUP SCREEN" can be selected only when the FAX option is installed.

5 Select “3. AUTO SLEEP” and press the key.

PROGRAM

01.MACHINE DEFAULTS

02.COPY SETUP 03.FAX SETUP

MACHINE DEFAULTS

01.CASSETTE SIZE 02.WALKUP SCREEN 03.TIMERS

TIMER 1.AUTO CLEAR 2.AUTO LOW POWER 3.AUTO SLEEP

Select the desired Automatic Sleep Time by using			TIMERS
6 the
	or	key.	AUTO		240MIN
			SLEEP:	45
• Select the waiting time from the following:
						3MIN
3, 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 80, 90,
100, 110, 120, 150, 180, 210 or 240 minutes.

5-5