3
1
2
3
4
5
6
7
9
10
11
12
8
2. PREFACE
COPYRIGHT 2000
TOSHIBA TEC CORPORATION
Thank you for purchasing the Toshiba Digital e-STUDIO16/20/25 Copier. This Operator’s Manual describes
the following:
• how to use the digital copier
• how to make copies
• how to inspect and carry out maintenance on the digital copier
• how to remedy mechanical and copying problems.
Before using your e-STUDIO16/20/25 digital copier, thoroughly read and understand this Operator’s Manual.
To ensure that clean copies are made at all times and to make sure that the digital copier is in optimum
working order, keep this Operator’s Manual handy for future reference.
To ensure correct and safe use of the Toshiba Digital e-STUDIO16/20/25 Copier, this Operator’s Manual
describes safety precautions according to the following three levels of warning:
Before reading this Operator’s Manual, you should fully understand the meaning and importance of
these alert words.
Warning ..... Indicates a potentially hazardous situation which, if not avoided, could result in death, serious
injury, or serious damage, or fire in the equipment or surrounding assets.
Caution ......Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ...........Indicates a procedure you should follow to ensure the optimal performance of the digital
copier and problem-free copying.
Tip.............. Describes information useful to know when operating the digital copier.
Advice........ Describes an operation you should follow to maintain the digital copier in good working
order.
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in
which case the user may be required to take adequate measures.
1.Do not touch the connector terminal when disconnecting the cables of peripheral equipment.
2.Before opening any covers or removing any units from the copier, discharge the static electricity from
your body by touching a metal part of the copier.
This product is carrying the CE-Mark in accordance with the related European Directives.
Responsible for CE-Marking is Toshiba Europe GmbH Hammfelddamm 8,41460 Neuss, Germany.
Phone +49-2131 -158-01