Toshiba e-STUDIO16, e-STUDIO25 JOB Build, Place the original on the glass or feed tray and press

9. JOB BUILD

This function allows up to five sets of originals to be scanned and stored separately and then to be copied and output all at once.

1

2

3

4

5

Press the key on the control panel while in the initial screen for copying. The "EDIT MENU" screen appears.

Press the key to display the "JOB BUILD."

Then press the key.

Press the key to display the "ON." Then press

the key.

The "JOB BUILD: ON" screen appears. Press the key to return to the initial screen for copying.

Select the desired paper cassette, image density, reproduction ratio and copy quantity.

READY	1
ANNOTATION	:OFF
EDITING	:OFF
JOB BUILD	:OFF

JOB BUILD	1
OFF
ON
READY	1

ANNOTATION	:OFF
EDITING	:OFF
JOB BUILD	:ON

4

Note

To select the paper cassette, press the key, select AMS and then select the desired paper cassette.

6 Place the original on the glass or feed tray and press

the key.

7 After the original is scanned, the screen on the right appears.

•When scanning the next original without changing any

settings, place it on the glass or feed tray and select "Scan

next page." Then press the key.

•In scanning the next original, if the scan density and Edge Erase settings are changed, select "Change current

settings" to change the settings. Then press the key.

•When all originals have been scanned, select "End job build"

to start copying automatically. Then press the key.

Scanning in memory		1
Scanning Page	:XXX
JOB BUILD		1
Scan next page

End job build

Change current setting

4-25