Toshiba e-STUDIO25, e-STUDIO16 manual Alternation, Select YES, set the next original and press

5. ALTERNATION (Cont.)

When Placing the Original on the Glass

1 Press the key. The “FINISHING”screen appears.

2 Select the “ALTERNATION” mode.

•Select “ALTERNATION” from the FINISHING menu by

pressing the key. Then press the key.

3 Key in the desired copy quantity using the numeric keys.

4 Select the desired image density and reproduction ratio.

5 Place the original and press the key.

•When scanning of the first original has finished, the “NEXT ORIGINAL?” screen appears.

	6	Select “YES,” set the next original and press the
6		key.

READY	1
FINISHING: SORT
SORT/OFFSET
ALTERNATION

Copying				3
PAPER	:	A4	:AUTO
FINISHING	:ALTERNATION		ZOOM:100%

•The copier starts scanning the original.

•Press the key to stop scanning the original

temporarily. Press the key to resume scanning.

Press START to resume				3
PAPER	:	A4	:AUTO
FINISHING	:ALTERNATION		ZOOM:100%

•If the key is pressed again when scanning has stopped, the scanned data is deleted, and the alternation is

terminated. Select “YES” or “NO” and press the key.

•When all originals are scanned, the copier automatically starts copying and collates the copies into sets.

Memory clear?	3
YES
NO

7 For the next and subsequent originals, repeat step

6.

8 When the last original has been finished being scanned, select “NO.”

Next Original?	3
YES
NO

6-8 FINISHING MODE SELECTION