1-9
1
2
3
4
5
6
7
9
10
11
12
8
5Push the left (lock) side to lock the size selection
lever.
Tip
Changing the paper size of the cassette alone does not change
the cassette size indication on the display. To change the cassette
size, perform cassette size setting on the Message Display Panel.
Page 1-11
7Install the cassette into the copier.
6Place paper in the cassette.
• Up to 550 sheets of paper (60 mm) (recommended by
Toshiba) can be set.
• Do not add paper above the line indicated on the guide.
• Do not use creased, folded, wrinkled or damp sheets of
paper.
Side guide
Approx. 0.5 mm
Side guide
Approx. 0.5 mm
Note
Make sure that a gap of approx. 0.5 mm (less than 1 mm in
total) is left between the paper and the side guide. If there is
no gap, this would causes paper misfeeding.