Toshiba e-STUDIO25 JOB Memory, Storing a New Combination of Copy Modes, Select desired copy modes

11. JOB MEMORY

You can store and recall a combination of frequently used copy modes at any time.

In addition to reproduction ratios, image density, copy quantities, editing modes, duplex copying modes and image shift modes can be stored. Storage is available for up to four combinations.

Storing a New Combination of Copy Modes
Select desired copy modes.
1 Examples:
Reproduction ratio	85%
Copy quantity	30
Image density	Automatic
Copy size	A4

•Check that each mode is correctly set.

2 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears.

3 Press the key to display“JOB MEMORY.” Then

press the key.

4 Select “MEMORY” by pressing the key.

Then press the key.

5 Select the job number to be saved from“MEMORY1”

to “MEMORY4.” Then press the key.

Tip

When a memory location (with a copy job programmed) is selected, the Job Memory icon is highlighted.

The stored copy mode is not erased when the copier is turned off. When a job number with a copy mode already stored is selected, the stored copy mode is deleted and replaced by a new copy mode.

6 Press the key to return to the initial screen for copying.

4

READY	1
EDITING	:OFF
JOB BUILD	:OFF
JOB MEMORY

JOB MEMORY	1
RECALL
MEMORY

MEMORY	1
MEMORY1
MEMORY2
MEMORY3
MEMORY4

4-27