Toshiba e-STUDIO16, e-STUDIO25, e-STUDIO20 manual Loading Paper, Adding Paper to the Cassettes

2. LOADING PAPER

Adding Paper to the Cassettes

When the paper supply in the selected paper cassette runs out, the Recording Paper Lamp flashes and the following message appears:

CASSETTE1 empty

Open CASSETTE1

Load Paper

Close CASSETTE1

1 Pull the cassette grip up and pull, out the cassette carefully until it comes to a stop.

2 Open a paper package, take out the whole ream of paper and place it in the cassette.

•Up to 550 sheets of paper (recommended by Toshiba) can be set in each cassette.

•Do not add paper above the line indicated on the guide.

•Do not use creased, folded, wrinkled or damp sheets of paper.

Note

Make sure that a gap of approx. 0.5 mm (less than 1 mm in total) is left between the paper and the side guide. No gap causes paper misfeeding.

3 Push the cassette straight in until it comes to a stop.

• Be sure to push the cassette in carefully and fully.

7

Approx.0.5mm

Side guide

Side guide

Approx.0.5mm

7-3