Toshiba e-STUDIO20 manual Edge Erase Copying, Place the originals on the feed tray or on the glass

4. EDGE ERASE COPYING

If the edges of an original are torn or dirty, they are reproduced as black stains on the copy.

Using the edge erase mode, a white border will be created along the outside edges of the copy eliminating the marks. The default edge erase margin is 10 mm, but you can select any margin within the range of 4 to 20 mm.

Example of Edge Erase Copying

4

1 Press the key on the control panel while in the initial screen for copying. The “EDIT MENU” screen appears.

2 Press the key to display “Edge Erase.” Then

press the key.

3 Press the key and select the “ON.”

Then press the key.

4 The current edge erase margin appears on the screen. To change the edge erase margin, select

the desired margin by using the or key.

Then press the key.

•The edge erase margin changes at increments of 1 mm.

READY	1
DUAL PAGE	:OFF
IMAGE SHIFT	:OFF
EDGE ERASE	:OFF

EDGE ERASE	1
OFF
ON
EDGE ERASE	1
	20mm
10mm
	4mm

5 The selected edge erase margin appears on the

screen. Press the key to return to the initial screen for copying.

6 Place the original(s) on the feed tray or on the glass.

7 Select the desired paper cassette, image density, reproduction ratio and copy quantity.

8 Press the key.

READY	1
DUAL PAGE	:OFF
IMAGE SHIFT	:OFF
EDGE ERASE	:10mm

4-14EDIT MENU