Toshiba e-STUDIO20, e-STUDIO25, e-STUDIO16 manual Automatic Test Mode, Auto Test

1. AUTOMATIC TEST MODE

AUTO TEST

AUTO TEST mode, permits you to automatically perform a series of copier tests in one operation.

The test items performed by the AUTO TEST are:

•FLASH ROM TEST

Checks the program data, function data, and language data.

•SRAM TEST

Checks the SRAM memory.

•DRAM TEST

Checks the DRAM memory

•MODEM TEST (Only when optional FAX kit is installed) Checks the modem and detects line current.

•SCANNER TEST

Checks the image scanner.

•CODEC TEST

Checks the CODEC IC.

•PRINTER TEST

Checks the printer components for proper operation and prints one test page.

•PHONE BOOK DATA TEST (Only when optional FAX kit is installed) Checks the phone book data.

•PCL BOARD TEST

Checks the optional PCL print kit.

Note

AUTO TEST cannot be performed if image data is stored in the memory.

1

8

2

3

Press the key to enter the program menu.

Select “05.TEST MODE” and press the key.

Select “01.AUTO TEST” and press the key.

•“Auto Test” appears on the screen indicating that the test is under way.

•When all the tests end, the word “Completed” is displayed on the screen.

•The results of the auto test can be confirmed with the self test report. Page 8-12

•If the result of the auto test is judged to be NG, call your service representative.

PROGRAM

01.DEFAULT SETTINGS

02.LISTS 03.INITIAL SETUP

04.MENU LIST 05.TEST MODE

TEST MODE

01.AUTO TEST

02.INDIVIDUAL TEST 03.TEST RESULT LIST

AUTO TEST

-----------------------------

8-2USER TEST MODE