RCA Model 21011 manual Installing the Phone, Connecting the AC Electrical Power

INSTALLING THE PHONE

Choose the best location to install your base and handset charge cradle. Your base and handset charge cradle should be placed on a level surface such as a desk or table top, or you may mount the base on a wall.

charge

CONNECTING THE AC (ELECTRICAL) POWER

1.Plug the power supply cord into the power jack on the back of the base and the other end into an electrical outlet. When the handset is placed on the cradle the charge indicator turns on to indicate the battery is charging.

2.Plug the handset charge cradle into an electrical outlet.

CAUTION: Use only the ATLINKS USA, Inc. power supply 5-2562 that came with this unit. Using other power supplies may damage the unit.

Allow the system to charge for 12 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised.

CONNECTING THE TELEPHONE LINE

On the base, plug the one end of the telephone line cord into the jack on the back of the base and the other end into a modular phone jack.

10