RCA Model 21011 manual Ringertone, SET Areacode, Area Code

AREA CODE

Make sure your handset or base is at the main mode. If you enter a 3-digit area code in the area code menu, your local area code will not appear in Caller ID messages you receive. Instead, you will see only the local seven digit number. Calls you receive from outside your local area code will show the full ten-digit number.

This setting may be made with the handset or the base. Make sure your phone is OFF (not in TALK mode).

1.Press the cid/vol (up or down arrow) button on the handset or the CID (up and down arrow) button on the base to scroll to AREA CODE.

LANGUAGE		AREACODE
AREACODE	EXIT	RINGERTONE	EXIT
OK		OK
HANDSET DISPLAY		BASE DISPLAY

2.Press the OK soft key and SET AREA CODE - - - shows in the display. - - -

is the default setting.

SET AREACODE

- - -

OKEXIT

3.Use the touch tone pad on your base or handset to enter your three digit area code.

4.Press the OK soft key to save your selection and return to the main menu. The selected area code displays for two seconds.

AREACODE - 317

NOTE: Press the EXIT soft key to keep the previous setting and return to the main menu screen.

14