RCA P61310, F38310 manual PIP PICTURE-IN-PICTURE Operation, PIP Buttons, Using the PIP Feature

BASIC TV OPERATION

PIP (PICTURE-IN-PICTURE) OPERATION

The PIP (Picture-In-Picture) feature lets you display a second, smaller analog (NTSC format) picture on top of the main analog picture.

Your TV is equipped with a dual NTSC tuner that tunes to cable or off-air television signals. You will only be able to use the PIP window and main picture with analog channels.

PIP BUTTONS

There are certain remote buttons that control the way the PIP window works:

PIP Brings up the PIP window. Press PIP again to remove the window.

Arrows Let you move the PIP window to different areas of the screen.

SWAP Switches, or “swaps,” the video from the PIP window with the main picture.

CH CTRL (Channel Control) Lets you switch channel control between the PIP window and the main picture. To determine whether you are controlling the PIP or the main picture, look at the channel banner as you change channels. The triangular indicator is beside the channel number for the picture you’re controlling.

Main picture channel number

Channel	PIP channel
control	number
indicator

USING THE PIP FEATURE

While you may use PIP in different ways, this basic PIP scenario should get you started. When watching an analog channel, follow these steps.

1.Press the PIP button on the remote control. The PIP window appears on the screen.

2.Use the channel up and down or digit buttons to change the PIP channel.

3.To change the program in the main picture window, press CH CTRL. Then use the channel up and down or digit buttons.

To go back and forth between controlling the PIP window and the main picture, press the CH CTRL button.

Note that you will only be able to use PIP with analog channels.

VCR1	ON•OFF			TV
DVD	VCR2	AUX		DIRECTV
MUTE				SKIP
	CH +
VOL				VOL
	CH
FETCH				GO BACK
GUIDE				INFO
Arrows		OK
MENU				CLEAR
1	2		3
4	5		6
7	8		9
INPUT			ANTENNA
	0
REVERSE	PLAY		FORWARD
RECORD	STOP			PAUSE
PIP	SWAP	CH CTRL		WHO
PIP
buttons

2 8