3.Press the speaker’s black negative
Caution: You might permanently damage your speaker by cleaning it with a vacuum cleaner. Use a feather duster or a soft loose cloth instead.
4.Press the speaker’s red positive (+) terminal tab and insert the other bare wire end into the opening. Then release the tab.
5.Using the speaker wire’s coding as a guide, connect the other end of the speaker wire to the amplifier’s corresponding (right or left) speaker terminals.
Care
Keep the speaker dry; if it gets wet, wipe it dry immediately. Use and store the speaker only in normal temperature environments. Handle the speaker carefully; do not drop it. Keep the speaker away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
Modifying or tampering with the speaker’s internal components can cause a malfunction and might invalidate its warranty.
Troubleshooting
This speaker has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your speaker is not operating as it should, take it to your local RadioShack store or call
3
