HELP
| Check the AC cord of TV is plus in or not. If still no power, please |
|
No Power | Pull out the plug and replug in after60 seconds. And open the TV |
|
again. |
| |
|
| |
|
|
|
| To cause double image or phantom if there has high building or high |
|
Signal receive | mountain round |
|
operation: consult instruction of vernier regulation or change the direction |
| |
not properly |
| |
of external antenna. |
| |
|
| |
| If you use the indoor antenna . under certain circumstance, receive will be |
|
| more difficult .So you can change the direction of the antenna to adjust the |
|
| image effect . If can't change image receiving effect either , you have to |
|
| use external antenna. |
|
No picture | Check the antenna at the back of TV is connected properly or not. |
|
Try to select other channels and check whether the TV problem itself or not. |
| |
|
| |
|
|
|
Video is ok ,but | Increase the volume. |
|
without audio | Check the TV is in mute mode or not , and please press the mute |
|
| button to make sound resume. |
|
|
|
|
Audio is ok, but | Increase contrast and brightness. |
|
color error or no |
|
|
picture. |
|
|
snow statics | Check the antenna at the back of TV is connected or not . |
|
picture and noise |
|
|
Level broken line | Maybe has electrical appliance interfere, such as hair drier, vacuum |
|
| cleaner and so on, please turn off these kinds of electrical appliance. |
|
|
|
|
Perhaps the location for the antenna is not good.Use the tall beamed |
| |
"simulacrum" | antenna can be improved quality of the display image. |
|
The TV no | Operate the remote direct to the remote sensor on the TV.If still no |
|
response with | response for the TV, please check if the plastic bag on the remote take or |
|
the Remote. | not. And checkif the location for the battery is correct.Change the new |
|
| battery. |
|
| The TV will shift to the STAND BY if no response from the remote in the |
|
| few minutes. |
|
NO Video In. | Please check if the display cable connect to the VGA correcte . |
|
(PC Mode) | Please check if there has the bend on the display cable. |
|
Vertical twinkling | Enter the main menu, Use the clock regulator for the Video display noise |
|
(PC Mode) | to eliminate the vertical line. |
|
horizontal ripping | Adjust the Audio sound horizontal in the main menu to clear the horizontal |
|
(PC Mode) | ripping line. |
|
|
|
|
The screen is too | Adjust the contrast ratio or brightness in the main menu. |
|
bright or too dark |
|
|
(PC Mode) |
|
|
PC Function no | Check the computer setting in the state of compatible display resolution |
|
response |
|
|
|
|
|
Ripping line in | Please use good quality connecting cable. |
|
RCA connecting |
|
|
| Unplug the power cable and wait for 30 seconds, then connect.If there is |
|
Problem still | some problem with our TV, do not repair it by yourself, please contact with |
|
exist | the customer service center. |
|
|
|
|
Note: There will be complete picture and the brightness will come down if the TV
is in the static picture for too long time, So please do not keep the TV in a state of same Menu or same picture that has much difference in brightness and contrast ratio for too long time.
16
