INSTALLATION GUIDE

 GROUNDING INSTRUCTIONS ELECTRICAL REQUIREMENTS INSTALLATION GUIDE Power Supply CordManual background

 

 

 

 

 

 

 

 

1.

Make sure that all the packing materials

 

5.

For correct operation, the oven must

 

 

 

are removed from the inside of the door.

 

 

have sufficient airflow. Allow 20cm of

 

 

2.

Check the oven for any damage, such as

 

 

space above the oven, 10cm at back and

 

 

 

misaligned or bent door, damaged door

 

 

5cm at both sides. Do not cover or block

 

 

 

seals and sealing surface, broken or

 

 

any openings on the appliance. Do not

 

 

 

loose door hinges and latches and dents

 

 

remove feet on which oven stands.

 

 

 

inside the cavity or on the door. If there is

 

6.

Do not operate the oven without glass

 

 

 

any damage, do not operate the oven

 

 

tray, roller support, and shaft in their

 

 

 

but contact qualified service personnel.

 

 

proper positions.

 

 

3.

This microwave oven must be placed on

 

7.

Make sure that the power supply cord is

 

 

 

a flat, stable surface to hold its weight

 

 

undamaged and does not run under the

 

 

 

and the heaviest food likely to be cooked

 

 

oven or over any hot or sharp surface.

 

 

 

in the oven.

 

8.

The socket must be readily accessible so

 

 

4.

Do not place the oven where heat,

 

 

that it can be easily unplugged in an

 

 

 

moisture, or high humidity are generated,

 

 

emergency.

 

 

 

or near combustible materials.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Manual backgroundManual background GROUNDING INSTRUCTIONS Manual backgroundManual background

This appliance must be grounded. In the event of an electrical short circuit, grounding reduces risk of electric shock by providing an escape wire for the electric current.

WARNING Improper use of the grounding plug can result in a risk of electric shock.

ELECTRICAL REQUIREMENTS

The electrical requirements are a 120 volt 60 Hz, AC only, 15 amp. It is recommended that a separate circuit serving only the oven be provided. The oven is equipped with a 3-prong grounding plug. It must be plugged into a wall receptacle that is properly installed and grounded.

Power Supply Cord

1.A short power supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

2.Longer cord sets or extension cords are

available and may be used if care is exercised in their use.

3.If long cord or extension cord is used:

a)The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance.

b)The extension cord must be a grounding-type 3-wire cord, and The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally.

Notes:

If you have any questions about the grounding or electrical instructions, consult a qualified electrician or service person.

Neither the manufacturer nor the dealer can accept any liability for damage to the oven or personal injury resulting from failure to observe the electrical connection procedures.

4

Page 5
Image 5
RCA RMW742 warranty Installation Guide, Grounding Instructions, Electrical Requirements, Power Supply Cord