RCA RMW948 owner manual Operation Instructions, Signals During Oven Settings, A. One-stageCooking

OPERATION INSTRUCTIONS

SIGNALS DURING OVEN SETTINGS

ONE SIGNAL: Oven accepts the entry.

TWO SIGNALS: Oven does not accept the entry, check and try again.

				You can set a cooking time from one second
				to 99 minutes and 99 seconds.
SETTING THE CLOCK			2.	If you want to set a power level other than
				100% power, touch POWER, then
1.	Touch CLOCK pad.
			3.	Use the number pads to enter the power level.
2.	Use the number pads to enter the	correct
				You can set the power level from 1 to 9.
	time. You must touch at least three numbers
			4.	Touch START/STOP to start cooking.
	to set the clock (one for hour and two for
			Use single digits to set a cooking power level:
	minutes).
3. Touch CLOCK pad again.
					Number pad	Cooking power
NOTE:						90%
					9
·This is a 12 hour clock. When the oven is first						80%
					8
plugged in or when power resumes after a power
					7	70%
interruption, the display will show ENTER CLOCK
					6	60%
TIME. If you prefer to not have the clock displayed,
touch RESET.					5	50%
·You can check the clock time while cooking is in					4	40%
progress by touching the CLOCK pad.						30%
					3
						20%
					2
						10%
SETTING THE OVER TIMER					1

1.Touch TIMER.

2.Enter the amount of time by touching the number pads. Digit time is in minutes and seconds and set left to right. Set one digit (a 5 for 5 seconds) or up to four digits (2405 for 24 minutes, 5 seconds).

3.Touch START/STOP.

NOTE:

·Time countdown can be seen in display for 3 seconds before clock or cooking time is returned to display.

·Touch TIMER and then touch RESET to cancel TIMER during timing process.

SETTING A COOKING PROGRAM

A. One-stage Cooking

1.Use the number pads to set a cooking time.

B. Two-stage Cooking

Some recipes require different stages of cooking at different temperatures.

1.SET STAGE 1:

Follow steps 1 and 2 in “One-stage Cooking”. DO NOT TOUCH START/STOP

2.SET STAGE 2:

Touch COOK then enter proper cooking time and (lower) power level. (Most 2-stage recipes use lower power for second stage.)

3.Touch START/STOP. NOTE:

·after total time has elapsed, 4 signals sound and END appears in display. Touch RESET or open oven door to clear END before starting another cooking function.

8