USING THE CD PLAYER
Combined with features such as Shuffle, Repeat, and Programmed play, you have lots of options for playing CDs.
KNOWING YOUR BUTTONS
The following buttons are used for basic CD operation:
PLAY/PAUSE 
— This button works as a toggle switch: press to begin play, press again to pause play.
TRACK/SEARCH 
and 
•In Stop mode— Press to move to the beginning of the preceding or following track.
•In Play or Pause mode — Press and release to move to the beginning of the preceding or following track. Press and hold to search within a track.
STOP 
— Press to stop play.
Look for this Logo
You can play 3" and 5" compact discs that have this logo.
DISC | |
RADIO | TAPE |
PLAY/PAUSE | |
SHUFFLE REPEAT PROGRAM | TRACK/ | STOP |
SEARCH |
OPEN
THE DISPLAY
When the power is on, the display tells you what’s going on with your system. (See “Display” section, page 4)
CD DISPLAY MESSAGES
The following messages appear in the display to tell you what the CD player is doing:
Message Meaning
REPEAT 1 ALL | SHUFFLE | Y |
DISC (CD) function is active. (Note: 
is an icon)
CD drawer is in (closed).
CD drawer is out (open).
No disc is in the tray or the disc is damaged or unreadable.
No tracks are programmed (applies to Program mode).
Program is full (applies to Program mode). This is displayed for three seconds when the last track is programmed.
Program has been cleared (erased) from memory (applies to Program mode).
Reading CD’s table of contents (how many tracks it has and the total time for the disc). This information is displayed in Stop mode.
6
