RCA RP-9349 manual Setting UP the System, Connecting & Placing the Speakers, Connecting Antennas

SETTING UP THE SYSTEM

CONNECTING & PLACING THE SPEAKERS

Each speaker has its own connection terminals on the back of the system, so connect the wires from each speaker to one set of terminals. When connecting the speakers, make sure that the bare end of each wire makes contact with the metal grips inside the terminal. There are connections provided for main and surround speakers.

1.Press down on the tab to open the red terminal and insert the red wire (+) into the red terminal.

2.Press down on the tab to open the black terminal and insert the black wire (–) into the black terminal.

WARNING: Be sure to follow these instructions carefully. The system can be damaged if speakers are improperly connected.

The speakers should be set between 6 and 10 feet apart. Putting the speakers any closer or any farther apart may result in distorted sound.

The speakers should also form a 45 degree angle to the central listening point in the room, creating a triangle of listening enjoyment.

CONNECTING THE

ANTENNAS

The AM and FM wire antennas connect to the FM ANTENNA terminals and AM terminal on the system’s back panel, and must be connected for clear reception. Connect the antenna wires similar to the way you connected the speakers.

After connecting the antennas, extend them to their full length; then you can adjust their position for better reception when you are listening to the radio.

RED BLACK

+ –

	ANTENNA
FM	FM
AM
	AM
	LOOP

6