RS2005/07 EN rev.1 6/14/02 8:38 AM Page 12
Radio
EN Selecting Tuner Band
1.Press SOURCE on the main unit or TUNER on the remote control to enter Tuner (TU) mode.
2.Press BAND/APP to select between AM or FM radio band.
Tip: Your audio system has 30 preset stations.
Tuning to a Station
Press SKIP FORWARD / SKIP BACKWARD
on the main unit or TUNING or | on the |
remote control to select frequency. |
|
Auto Preset Programming
Press and hold BAND/APP button for 2 seconds to scan stations in FM and AM band. The stations will then be stored as preset channels. A maximum of 30 stations can be stored. Beware of your preset chan- nels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recov- ered.
FM AP 87.90 MHz
Using Presets
The tuner can be in either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.
•Press PROG/SET to enter PRESET mode.
•Press PRESET DN or UP on the main
system or PRESET or on the remote control to access the previous or next preset station.
Pr 01
•Press PROG/SET again to go to the selected preset station.The display first shows the preset program number and after a few seconds, the preset program and frequency will be displayed.
FM 07 87.90
MHz
Manually Setting Presets
1. Press SKIP FORWARD | / SKIP | |
BACKWARD | to access the desired | |
frequency. |
|
|
2.Press the PROG/SET button once.
3.The most recently accessed program location will be displayed.
4.If a different program location is preferred, press PRESET DN or UP on the main unit or
PRESET or on the remote control to move to the desired preset number
5.Press PROG/SET to store the selected frequency at that preset.
Suppressing Stereo Signal
Press STEREO to toggle between FM mono and stereo for stereo FM stations.
8