DUBBING A CASSETTE TAPE
1.Insert a prerecorded cassette tape into DECK 1, and a blank tape for recording into DECK 2 to dub a tape on one side.
2.Press DUBBING.
The RECORD and DUBBING indicators light, and both
PLAY direction indicators 
/ 
of DECK 2 flash.
3.Press PLAY 
or 
to select the direction of the cassette tape for DECK 2.
The indicators in the selected buttons stop blinking and the other indicators turn off.
The indicator 
of DECK 1 lights.
4.Press the STOP button on DECK 2 to stop dubbing. Both decks stop.
Note: If the original tape was recorded using Dolby NR, the copy also has Dolby NR, regardless of the position of the DOLBY NR switch. If the tape you copy does not have Dolby NR, you cannot add it to the tape you record.
Changing a Cassette Tape in DECK 1 During Dubbing
If you press STOP on DECK 1 during dubbing, DECK 1 stops and DECK 2 records 4 seconds of blank tape then goes into the pause mode. During this time, you can change the cassette tape
in DECK 1. Press RECORDPAUSE REC/ 
then press the PLAY button of DECK 1 to resume dubbing.
AUTO DUBBING A CASSETTE TAPE
It is convenient to use this function when dubbing an entire cassette tape from the beginning.
1.Insert a prerecorded cassette tape into DECK 1 and a blank tape for recording into DECK 2.
2.Press AUTO DUB.
The cassette tapes of DECK 1 and DECK 2 rewind automatically to the beginning after you press AUTO DUB. When rewinding is complete, Auto Dubbing begins.
One side of a cassette tape is recorded from the beginning to the end automatically regardless of the mode.
HI-SPEED DUBBING A CASSETTE TAPE
1.Insert a prerecorded cassette tape into DECK 1 and a blank tape for recording into DECK 2.
2.Press
3.Press DUBBING.
4.Press PLAY 
or 
to select the direction of the cassette tape for DECK 2.
The indicators in the selected buttons stop blinking and the other indicators turn off.
5.Press STOP on DECK 2 to stop dubbing. Both decks stop.
8
