SPECIAL FEATURES
CD-Deck Synchro Recording
If your CD player has a compatible CD Synchro function, you can automatically record your CDs. Connect the CD player’s and cassette deck’s CD SYNCHRO jacks as described in “Connecting the
Note: A
If REV MODE is set to automatically switch to the other side of the tape and the tape reaches the end of the first side while the CD player is playing, the CD player returns to the beginning of the current track and pauses. A
1.Load a compact disc in the CD player.
2.Load a blank tape (or one you want to record over) into Deck 2. Be sure the side you want to record on is facing you and the full reel is to the left.
3.Press on Deck 2 to set the tape direction and then press .
4.Set REV MODE and DOLBY NR.
5.Press RECORD.
6.Select the CD player on the receiver/amplifier, then begin play on the CD player.
7.Adjust the recording level.
8.Press the stop buttons on the cassette deck and the CD player.
9.Press CD SYNCHRO RECORD. Recording automatically begins.
When the compact disc finishes playing, the CD player stops and the cassette deck pauses. Within 1
minute, change the disc and start play on the CD player to resume recording. If the CD player does not start play within 1 minute, the cassette deck stops.
When the CD player changes discs
If the cassette deck reaches the end of the tape and stops while the CD plays, the CD player returns to the start of the current track, then pauses. To resume recording, load another tape and ensure the tape is moving in the desired direction. If it is not, press a play button ( 3 or 2 ) on the cassette deck to change the tape direction, then immediately press 7. You can resume recording by pressing CD SYNCHRO RECORD again. (Press the button within 1 minute after the CD player pauses. If more than 1 minute elapses, the CD player stops.)
12
