SETTING THE CLOCK

To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is plugged in, but not turned on.

Check that the rated voltage of the unit matches your local voltage.

1.When the AC power cord is plugged in, the clock display will blink.

3.Press the / buttons to set the current hours then press the SET CLOCK button once to confirm. The MINUTES will now blink.

2.Press the SET CLOCK button until the HOUR blinks.

4.Press the / buttons to set to desired time then press the SET CLOCK button once to start the clock.

SETTING THE COOKING timer

1.Press the TIMER button. The “TIMER” indicator appears and the cooking time “10” blinks.

2.Press the / buttons on the unit to select your desired time from 1-99 minutes.

Press the TIMER button repeatedly to select following preset times: 10, 15, 30, 45, 60, 75, 90 minutes. You can then “fine-tune” your time by using the / buttons on the unit.

Press and hold the / buttons on the unit to fast forward/reverse to desired time.

3.When the preset time elapses, the ALARM will sound.

4.To turn OFF the ALARM, press the TIMER button once. Otherwise, the ALARM will automatically turn off after 60 minutes if no button is pressed.

Cancelling the Cooking Timer

Press the TIMER button until the time of the cooking timer shows “OFF”. The “TIMER” indicator will disappear.

15

RCA SPS36073 English IB W012 OK.indd 16

8/21/2009 4:47:51 PM

Page 16
Image 16
RCA SPS36073 owner manual Setting the Clock, Setting the Cooking timer, Cancelling the Cooking Timer