200-Watt Powered Subwoofer with Remote
Your RCA
The subwoofer combines the power of a
The infrared remote control lets you regulate the subwoofer’s volume without interrupting your listening.
Your subwoofer has an adjustable high cut filter and high- and
Auto On/Off — automatically switches the subwoofer’s amplifier to standby if the subwoofer does not receive a signal for
Power Indicator — the red indicator on the subwoofer’s volume control lights when the amplifier receives an audio signal, and turns off when the amplifier goes into standby mode, so you can see at a glance when the subwoofer is operating.
Note: You need speaker wire (not supplied) to connect the subwoofer to an amplifier or receiver’s speaker outputs.
Note: You need phono cables (not supplied) to connect the subwoofer to an amplifier or receiver’s subwoofer out or pre out jacks.
Volume Control — lets you match the subwoofer’s output level to your satellite speakers’ output (if used). Rotate the control clockwise to increase, or counterclockwise to decrease, the subwoofer’s output.
Phase (Polarity) Switch — Inverts the subwoofer’s output polarity so you can set it to match the main speakers.
Frequency Hz Control — lets you set the high frequency cutoff point. Rotated fully clockwise, the subwoofer cuts high frequencies over 200 Hz. Rotated fully counterclockwise, it cuts high frequencies over 50 Hz.
© 1999 Tandy Corporation.
All Rights Reserved.