Connecting to Speaker
Terminals
Connect the amplifier/receiver’s speaker output terminals to the subwoofer’s HIGH LEVEL INPUT terminals. Be sure to connect the terminals in phase, connecting positive (+) to positive and negative
Right | Amplifier/Receiver | Left |
Speaker | Output Terminal | Speaker |
OUTPUT
+ |
receiver’s left (or right) positive speaker terminal.
To Subwoofer
From
Amplifier/
Receiver
From left or right speaker (be sure to match polarity)
2.Position the twisted wire ends between the open barrel ends of the speaker pin.
3.Using a pair of pliers, crimp the open barrel ends of the speaker pin to hold the wire ends in place.
4.Plug the speaker pin into the proper terminal on the subwoofer.
CONNECTING TO POWER
Plug the subwoofer’s AC power cord into an AC outlet.
Connecting Speaker Pins
If you use Megacable or any other high- quality,
1.Twist together the ends of the wires from the left (or right) speaker’s positive terminal and the amplifier/
ADJUSTING THE VOLUME
Once you have made all connections, follow these steps to adjust the volume.
1.Rotate the control on the front of the subwoofer to its lowest setting.
2.Turn on your amplifier/receiver and another component (such as a radio, cassette player, CD player, or turntable).
3.Begin playing an audio source (such as a CD) and adjust the amplifier/ speaker’s overall volume to a comfortable level. Rotate the volume
5
