![](/images/new-backgrounds/19952/1995233x1.webp)
CONNECTIONS- Outputs: Binding Posts
Connecting the Outputs to the Speakers
Use either the binding post or the Speakon™ output connections. Binding posts are covered on this page, Speakons on the following page. Note that the PL6.0 II does not support Bridge mode output from the Speakons (see page 11).
There are two basic speaker connection configurations for the PL6.0 II. Stereo and Parallel operating modes use two separate output channel connections. Bridge mode uses only one output channel connection.
Refer to the chart below for connection diagrams. Mode Switch position is shown for reference. Speakon™ pinout is provided on the following page.
Do not use less than
Do not use
17