![](/images/new-backgrounds/19952/1995247x1.webp)
SPECIFICATIONS- PowerLight 6.0 II Electrical Data
Output Circuit Type |
| ||
Output Power in watts |
|
| |
20 Hz to 20 kHz | 8 ohms per channel | 1150 at 0.1% THD | |
|
| 4 ohms per channel | 2050 at 0.1% THD |
|
| 2 ohms per channel | 3250 at 0.1% THD |
EIA: 1 kHz @ 1% THD | 8 ohms per channel | 1300 | |
|
| 4 ohms per channel | 2200 |
|
| 2 ohms per channel | 3500 |
Bridged Mode | 16 ohms, 1 kHz, 1% THD | 2600 | |
|
| 8 ohms, 1 kHz, 1% THD | 4400 |
|
| 4 ohms, 1 kHz, 1% THD | 7000 |
Dynamic Headroom at 4 ohms | 0.77 dB |
| |
Distortion, THD |
|
|
|
20 Hz to 20 kHz | <0.06%: 8, 4, and 2 ohms at 10 dB below rated power | ||
20 Hz to 2 kHz | <0.02%: 1150 watts at 8 ohms, 2050 watts at 4 ohms, 3250 watts at 2 ohm | ||
Frequency response at 10 dB below rated power |
|
| |
|
| 20 Hz to 20 kHz ±0.15 dB |
|
|
| 2 Hz to 50 kHz ±3.0 dB |
|
Damping Factor |
| >2000 at 1 kHz and below |
|
Noise (unweighted) | 107 dB below rated output from 20 Hz to 20 kHz | ||
Voltage Gain | 40x (32 dB) |
|
|
Input Sensitivity | 2.4 Vrms (+9.4 dBu) for rated power into 8 ohms |
| |
| 2.3 Vrms (+9.5 dBu) for rated power into 4 ohms |
| |
Input Impedance | 20 k ohm balanced, 10 k ohm unbalanced |
| |
Controls | AC power switch, Mode switch, Gain controls, Clip Limiter switches | ||
Connectors | Inputs: “combo” and |
| |
| Outputs: | binding posts, 60 amp rated, recommend no banana plug usage | |
|
| Speakon outputs, 1 per channel for Stereo and Parallel operation only | |
| Power Supply Control connector: |
| |
LED Indicators | Power supply section: | Power “on”- red; Standby- yellow; Protect, red (1 LED for each channel) | |
| Signal indicator section: | Signal- green; |
24
Note: Specifications are subject to change without notice.