Knoll 6.0 II user manual Unpacking and Inspection, SETUP- Rack Mounting

UNPACKING

Unpacking and Inspection

The PL6.0 II is highly durable and is carefully packaged. We recommend you inspect the unit carefully after removing it from the packaging, as occasionally there may be damage due to some unfortunate incident during shipment. Report any damage to the shipping carrier. We recommend saving the carton and packing material. It is always a good idea to keep the packaging in case the unit must be shipped back to your dealer, distributor, or service center. Also note: some freight companies consider damage claims without the original packing materials invalid.

The QSC shipping box should contain: 1- the PL6.0 II amplifier

2- this Owner’s Manual

3- accessory packet containing: -rear rack ear mounting kit

-terminal-block connectors for inputs and remote power supply control -four adhesive feet

SETUP- Rack Mounting

Supporting the Front of the Amplifier

Rack mounting of the amplifier is optional. The PL6.0 II is designed to fit a normal 19-inch width equipment rack. Secure the front rack ears using four machine screws with washers, as shown below. Verify operating voltage printed on the serial number plate; it is located on the side panel by the AC cord entry. Once the amplifier is mounted, it may be difficult to read this information (see p.9).

CAUTION!

To minimize the risk of injury, we recommend an assistant help support the amplifier during rack installation.

When installing equipment into a rack, distribute the units evenly. Otherwise, haz- ardous conditions may be created by an uneven weight distribution.

6