Knoll 6.0 II user manual SETUP- AC Power Requirements, AC Power Connection

SETUP- AC Power Requirements

AC Power

Before connecting the amplifier to the AC mains, check the serial number plate to verify operating voltage.

The PL6.0 II is available in 120 or 240 Volt models. Make sure the AC mains voltage is the same as specified on the serial number plate.

120 Volt models have the AC cordset hard- wired to the chassis. 240 Volt models have an IEC-style detachable cordset.

Do not use improper AC mains voltage! It can create hazardous condi- tions and severely dam- age the amplifier!

AC Power Connection

120 Volt Models

NEMA L5-30 Receptacle

Connect the 30 Amp twist-lock connectors by orienting the locking L-shaped prong with the corresponding connector entry, then fully insert the three prongs. Twist the plug about 1/8 of a turn clockwise to lock the connector and plug.

240 Volt Models

European 3-conductor Earthing Receptacle Insert the plug fully into the receptacle.

The PL6.0 II is a very high-power amplifier and as such can demand high current from the AC service. All connections must be properly rated for reliable operation.

Use of extension cords is discouraged. If extension cords must be used, use only heavy-duty 10 gauge extension cords that are as short as possible.

9