Examine the lists 2on | Magnavox VRA641AT99 specs

Setting Up the VCR Plus+ Programming System (cont’d) 33

2

Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps.

3

Press the VCR button, then press the MENU button.

4

Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the FF :/OK button.

Examine the lists
2on page 32.
				3
CBL / DBS		TV		VCR
VCR/TV		POWER		EJECT
QUICK PROGRAMMING					6-7
1	+	2	+	3
START	.............	STOP	.............	DATE
4	-	5	-	6
DBS		DAILY		WEEKLY
7		8		9

5

Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the FF :/OK button.

SET VCR PLUS+ CH.

VCR PLUS+		CABLE/TV
99		– – –
01	– – – –>	– – –
02	– – – –>	– – –
03		– – –

04– – –

SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH >/OK

TO END PUSH EXIT

6

While a VCR Plus+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons so that the arrow appears beside the VCR Plus+ channel number you need.

Press the FF :/OK button.

SPEED	0		CLEAR
STILL/SLOW
....	.....	...		+
- ....		...		+
REW				FF
	PLAY
				/OK
	STOP
VOL	MENU			CH
EXIT/STATUS
	TIMER
SKIP SEARCH	INDEX			AUDIO/MUTE
SMARTPICTURE				REC /OTR

4-7

3

8

7

While the space for the Cable/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the Cable/TV channel number from the list on page 32. Press the FF :/OK button.

Repeat steps 6-7 until you have entered all the channels on your list.

●If you are using a Cable Box/DBS, the Cable/TV channel will be 3 or 4 (the Cable Box/DBS output channel) for every VCR Plus+ channel. You must set the Cable Box/DBS to the channel you want to record; leave the Cable Box/DBS on for the timer recording.

8

Press the EXIT/STATUS button.

Image 33

Magnavox VRA641AT99 owner manual Setting Up the VCR Plus+ Programming System cont’d, Examine the lists 2on

Contents

VRA641AT For Customer Use Dear Philips Magnavox product owner Features Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups without a Cable Box CH3 CH4 Hookups without a Cable Box cont’d Hookups with a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Cable signal RF coaxialWith this connection 2Cable Box/DBS Turn on the TV Wait for the VCR to set up channels Press the VCR button, then press the Power buttonTurning on Your VCR Press the FF /OK button. The menu shown below will appear Press the VCR button, then press the Menu button Automatic Channel Setup Adding/Deleting Channels Press the Play 8 or Stop 9 button to selectADD/DELETE CH., then press the FF /OK button Instructions continue on Manual Clock SettingTo make corrections, follow steps Button When the month and day are correct, press the FF /OK Setting the Clock cont’dPress the Play 8 or Stop 9 button repeatedly to set Button Press the FF /OK button repeatedly to select Time Time Zone Selection Manual PBS Channel Selection Press the FF /OK button repeatedly to select PBS CH Automatic PBS Channel Selection Daylight-Savings Time Press the Stop 9 button or Play 8 button to select Language Selection Remote Control Buttons VCR/TV Button Timer ButtonSpeed Button EXIT/STATUS Button Display Panel STILL/PAUSE Button REWind Button STOP/EJECT Button FF Fast Forward ButtonFront VIDEO/AUDIO OK Button Play Button Jacks MENU/EXIT Button Rear Panel On-Screen Status Displays If on Screen Mode is set to on or Counter TV Codes Setting the Remote Control to Operate a TV Setting the Remote Control to Operate a Cable Box/DBS Sqpb does not deliver Super VHS resolution PlayingIf playback does not start automatically, press the Play VCR records in a preset volume RecordingPress the VCR button One-Touch Recording Channels are set up. Details are on pagesStarting an OTR Use the CHannel 8/9 button or the Number buttons to If you use a Cable Box/DBS, you VCR light will disappear from the display panel Setting Up the VCR Plus+ Programming System ChannelsCall Letters Examine the lists 2on Setting Up the VCR Plus+ Programming System cont’d Timer Recording with the VCR Plus+ Programming System FF /OK button Channels are programmed. Details are on pages Quick Programming Tape Speeds Cassette type / Playback TimeHrs Will play tapes recorded in LP, but LP will not Same length of time every week If you forget to turn off the VCRMessage, press the Clear button To see the programmed timer recordings individually Checking, Editing, or Clearing Timer RecordingsQuick Programming cont’d Indicates a Daily recording Follow the steps below to set Timer REC Speed to Auto Timer Recording Speed Setting Rerecording Tape Duplication VCR 1 will play your tape. Insert a prerecorded tape in VCRAudio and video cables are not included Index Search Multi-Channel Television Sound System Receiving a Stereo BroadcastReceiving a Second Audio Program Press the RECord/OTR button to start recording Multi-Channel Television Sound System cont’d Hi-Fi Stereo Tape Playback Video Stabilizer SmartPicture Natural This is generally the preferred setting Forward and Reverse Searching Playback OptionsViewing a Still Picture Viewing a Slow Motion Picture Dash will appear on the display panel When Child Lock is activated Blue Background Automatic Operation Features Cable Box/DBS Output Channel channel 03 or Glossary Specifications Helpful Hints Helpful Hints cont’d Renewed Index Page Page Supplied Accessories