CONNECTIONS- DataPort (QSControl users only)
What is a DataPort?
The DataPort is a QSC-specific connection used for interfacing amplifiers, amplifier monitor- ing devices and signal processors. It is typically used in larger-sized installations where amplifiers may be located far away from system operators. The DataPort interconnects provide audio inputs to the amplifiers and amplifier operating data (temperatures, power status, audio power level, etc....) to other QSC equipment, such as the CM16a Amplifier
Network Monitor. Managing all this information and the operation of the amplifiers is QSC’s QSControl software running on a PC. QSControl primarily handles amplifier tasks, while another QSC program, Signal Manager, handles Processor configuration.
If you are not using the PL6.0 II with QSControl, QSC DSP-3, QSC DSP-4 or other QSC DataPort accessory, do not use the DataPort.
DataPort Cables
Use only QSC Audio DataPort Cables for DataPort connections. Molded-connector DataPort cables are standard. Premium DataPort cables (made to order with hand-wired termination) provide individually shielded audio pairs for the best possible audio performance. Either type of QSC DataPort cable is available from QSC’s Technical Services Group. Computer VGA cables are similar, but can degrade your audio quality; we do not recommend their use.
Connecting
Orient the DataPort cable’s male HD-15 plug with the DataPort receptacle, insert fully, and finger- tighten the retaining screws. Do not use tools to tighten the retaining screws!
If using the DataPort only for control and monitor- ing of amplifier functions and NOT audio input, then the audio input may be connected to the “normal” combo or terminal-block connectors. If audio inputs are active on both the DataPort and normal connections, they will be summed, producing unexpected results.
If connecting a QSC DSP-3 or DSP-4 module to the PL6.0 II, make sure the DataPort cable between the amp and the DSP module has pin #9 removed from either end. See DSP module documentation for details.
