SPECIFICATIONS
Name
Model
External dimensions
Internal dimensions
Effective capacity
Exterior
Interior
Outer door
Inner door
Shelf
Access port
Insulation
Compressor
Evaporator
Condenser
Refrigerant
Temperature controller
Temperature display
Thermal sensor
Alarm
Remote alarm contact
Battery
Accessories
Weight
Optional component
W670 x D875 x H1860 (mm)
W490 x D600 x H1140 (mm)
333 L
Acrylic finish baked on zinc galvanized steel Acrylic finish baked on zinc galvanized steel Acrylic finish baked on zinc galvanized steel ABS resin panel with stainless frame, 2 doors Stainless steel, 3 shelves (adjustable)
W464 x D535 (mm), Load; 50 kg/shelf
17 mm diameter, 2 locations (back, bottom left corner)
Vacuum insulation panel + Rigid polyurethane
Hermetic type, Output; 400 W (high stage side), 600W (low stage side)
Tube on sheet type
Fin and tube type (high stage side), Shell and tube type (low stage side)
Microcomputer control system
Digital display
Platinum resistance (Pt 1000Ω)
High temp. alarm, Low temp. alarm, Power failure alarm
Door alarm, Filter check, Battery alarm Allowable contact capacity: DC 30V, 2A
258 kg
Inventory rack
3drawers for lower compartment
Note:
•Design or specifications will be subject to change without notice.
•The battery for power failure alarm is an article for consumption. It is recommended that the battery will be replaced about every 3 years. Contact Sanyo sales agency at the time of replacement of the battery for recycling.
PERFORMANCE
Cooling performance | |||||||
Temperature control range |
|
| |||||
Power source | 115V, 60Hz |
| 220V, 50Hz | 220V, 60Hz | 230V, 50Hz |
| 240V, 50Hz |
Rated power consumption | 780 W |
| 680 W | 730 W | 670 W |
| 705 W |
Noise level |
|
| 49 dB [A] (background noise; 20 dB) |
| |||
Maximum pressure |
|
|
| 1.9 MPa |
|
|
|
Note : The unit with CE mark complies with EC directives 89/336/EEC, 93/68/EEC and 73/23/EEC
28