Connections & Setup
TV/VCR
Player
DVD
TV/VCR back panel
|
|
|
| LINE IN | LINE | COMPONENT | 2A | |
|
|
|
| IN 1 | OUT | AUDIO VIDEO |
| |
|
|
|
| VIDEO |
|
| Y | |
|
|
|
|
|
|
| ||
| ANT/CABLE | L |
| L | PB |
| ||
|
|
| 75 W |
| (CB) |
| ||
|
|
|
|
|
|
| ||
| 1 |
|
| AUDIO |
|
|
|
|
|
|
|
|
| R | PR |
| |
|
|
|
|
|
| (CR) |
| |
|
|
|
|
|
|
|
| |
| cable | feed |
|
| 2C |
|
| |
|
|
|
|
|
|
| ||
| or |
|
|
|
|
|
| |
From | antenna |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| DVD player back panel |
|
|
|
|
| ||
| VIDEO | AUDIO OUT | COMPONENT |
|
| |||
|
|
| L R | VIDEO OUTPUT |
|
| ||
Y P B P R
Note: If you have model T27TF668, the placement of the jacks is different from the TV/VCR back panel illustrated here.
Note: The back of your DVD player might not look exactly like the one shown here.
2B
Connection: TV/VCR + DVD Player
1.Connect your cable or antenna to your TV/VCR
Connect the RF coaxial cable from your cable feed, cable box, or
2.Connect your DVD Player to your TV/VCR
To achieve the best picture quality, use the COMPONENT INPUT jacks on the back of the TV/VCR to connect the TV/VCR to your DVD Player.
Note: Recording can’t be done in the COMPONENT INPUT (video/audio) mode.
If your DVD Player doesn’t have Component Jacks, use audio/video cables to connect the TV/VCR to the DVD Player using the LINE IN VIDEO and AUDIO L and R jacks on the TV/VCR. Instructions for both scenarios follow:
Optimum Connection (illustrated above)
A. Connect three video grade cables to the
B. Connect the other ends of the video cables to the corresponding Component Output Jacks on your DVD Player (sometimes labeled Y, Pb, Pr).
C. Connect audio cables to the
Normal Connection
A. Connect audio/video cables to the LINE IN/IN 1 jacks on the back of the TV/VCR (labeled VIDEO and AUDIO L and R). Audio/video cables usually are bundled as a set. Usually, they are
B. Connect the other ends of the a/v cables to the audio and video output jacks on the back of the DVD Player (sometimes labeled AUDIO OUT L and R).
Go To Page 11
Chapter 1 | 9 |
